FloorPro firmware updater
Update your FloorPro directly from this page — no software to install.
- Enter your device ID to unlock the firmware
- Put FloorPro into update (DFU) mode
- Connect and flash
How to put FloorPro into update (DFU) mode
Use either method — both leave FloorPro in the STM32 bootloader:
A. From powered off
With the USB cable unplugged, hold the BOOT button and plug in the USB cable. Keep BOOT held until connected, then release.
B. While powered on
Hold BOOT, briefly press and release RST, then release BOOT.
Then click Connect & flash below and choose theSTM32 BOOTLOADER (a.k.a. “DFU in FS Mode”) device.
Windows: a one-time WinUSB driver bind (viaZadig) may be required for the browser to access the bootloader. macOS and Linux need no driver.
When flashing finishes, FloorPro restarts automatically into the new firmware.
Firmware is proprietary and unlocked per device. Your ID is checked on our server; it is never shared or made public.